Tensile testing machine

Pull side test machine

This steel tensile testing machine
Designed and developed for the safe use of rebar a...
DETAIL
產品簡介Product introduction
本台鋼筋拉力試驗機 This steel tensile testing machine
是為鋼筋續接器之使用安全而設計開發 Designed and developed for the safe use of rebar adapters
為避免摩擦焊接時因參數不對而造成之接點斷裂 In order to avoid contact breakage caused by incorrect parameters during friction welding
機台特性及特點:Machine characteristics
1.鋼筋拉力試驗機採用手動液壓控制 1.Reinforced tensile testing machine with manual hydraulic control
2.結合試體測試時,放置於中空千斤頂內可避免鋼筋斷裂時所產生之鉅響 2. When combined with the test of the test body, it can be placed in the hollow jack to avoid the loud noise generated when the steel bar breaks.
3.可從#5~#12之鋼筋及鋼筋續接器結合後之測試 3. Tests can be combined from #5~#12 steel bars and steel bar splicers
4.本機台使用雙動中空千斤頂 4. This machine uses double acting hollow jack
能力:100TON
尺寸:Φ230Í170Í100mm
行程:250mm
中空徑:80mm
ability:100TON
size:Φ230Í170Í100mm
stroke:250mm
Hollow diameter:80mm
5.主要配件

5-1.通用型夾具(可夾#5~#12之鋼筋)

5-2.疊板(可依鋼筋大小配合夾具使各號數之鋼筋怕可夾緊固定

5-3.擋板(位於左右兩測,防止鋼筋拉斷時噴出,避免造成危險

5. Main accessories

5-1. Universal type clamp (can be clamped #5~#12)

5-2. Stacking plate (can be adjusted according to the size of the steel bar to make the steel bars of each number afraid to be clamped and fixed

5-3. The baffle (located on the left and right sides to prevent the steel bar from being sprayed when it is broken, to avoid danger